Lifeline Systems Inc. 7100MHB ユーザーズマニュアル
xx
Questions? Call 1-800-635-6156
Help Needed – No Cell Signal Available
Alarm Event
Description
Description
Help Alarm initiated by the User pressing the button on
the Pendant or by the Pendant detecting a fall; and the
AT&T wireless network is unavailble. Then a verbal Warning
Message is delivered by the pendant.
the Pendant or by the Pendant detecting a fall; and the
AT&T wireless network is unavailble. Then a verbal Warning
Message is delivered by the pendant.
Priority
High
Device Action
The Help Alarm Signal will be buffered in the device. The
device will continue to try to connect to the network and
deliver the alarm. It will re-announce the voice prompt every
5 minutes until: the condition is corrected and the alarm
signal is delivered, or, 30 minutes has elapsed, or, the battery
is exhausted.
device will continue to try to connect to the network and
deliver the alarm. It will re-announce the voice prompt every
5 minutes until: the condition is corrected and the alarm
signal is delivered, or, 30 minutes has elapsed, or, the battery
is exhausted.
button re-tries constantly, annunciates every 5
minutes, resets after 30 minutes.
Alarm Event
Reported/
Displayed Locally?
Reported/
Displayed Locally?
Yes. Upon pressing the Help Button on the Pendant or when
the Pendant has detected a fall, a Voice Message plays:
“Your call cannot be connected. There is no signal strength.
Please move to another area.” The Indicator Light flashes
red. This is an alarm that will self-cancel once connection to
the AT&T wireless network is re-established.
the Pendant has detected a fall, a Voice Message plays:
“Your call cannot be connected. There is no signal strength.
Please move to another area.” The Indicator Light flashes
red. This is an alarm that will self-cancel once connection to
the AT&T wireless network is re-established.
Alarm Event
Reported to Philips
Lifeline?
Reported to Philips
Lifeline?
No. If the AT&T wireless network is unavailable a Help Alarm
Signal cannot be sent to the Call Center.
Signal cannot be sent to the Call Center.
Help Needed – Fall Detected by Pendant
Alarm Event
Description
Description
Help Alarm initiated by the Pendant detecting a fall.
Priority
High
Device Action
Operates normally
Alarm Event
Reported/
Displayed Locally?
Reported/
Displayed Locally?
Yes. When the Pendant has detected a fall, it plays a Voice
Message and the Indicator Light flashes red. Voice Message:
Your help call is in progress. Please wait. For proper use,
hold your help button up in front of you.
Message and the Indicator Light flashes red. Voice Message:
Your help call is in progress. Please wait. For proper use,
hold your help button up in front of you.
Alarm Event
Reported to Philips
Lifeline?
Reported to Philips
Lifeline?
Yes. The Pendant sends a "fall detected" Help Alarm Signal
to the Response Center from anywhere wireless signal is
available on the AT&T wireless network. Upon receiving the
"fall detected" Help Signal, the Response Center calls the
Mobile Button to establish contact with the Subscriber and
to see what kind of help they need.
to the Response Center from anywhere wireless signal is
available on the AT&T wireless network. Upon receiving the
"fall detected" Help Signal, the Response Center calls the
Mobile Button to establish contact with the Subscriber and
to see what kind of help they need.
dra
ft
Confidential Draft for Agency Submission Only.
Not for Posting on any Public-Facing Website
Not for dissemination to the public without the express written consent of Philips.