AEG AR 4025 BT 400425 ユーザーズマニュアル

74

A

B

C

D

C

Detach the mounting sleeve (D) and frame (B) from 

 

‹

the unit housing. Use the assembly keys (C) to do so.

Fit the mounting sleeve into the ISO dashboard slot.

 

‹

Bend the mounting sleeve tabs round with a screw-

 

‹

driver so that the frame is mounted securely in the 

dashboard slot.

Check that the frame is secure.

 

‹

Connect the ISO connection of the unit to the two ISO 

 

‹

connectors of your vehicle.

Connect the antenna cable of the vehicle antenna to 

 

‹

the antenna adapter of the unit.

If necessary, also secure your unit against theft. 

 

‹

Fasten the screws to the mounting bracket and to the 

mounting material on the engine firewall of the car.

Slide the unit carefully into the mounting sleeve, until 

 

‹

it clicks into place.

After all connections have been made, press the 

 

‹

button (26) using a ballpoint pen or other pointed 

object.

Attach the control panel (A), as described under  

 

‹

„Attach control panel“.

 

When inserting the unit, pay attention to the cable 

 

►

routing to prevent damage.

Then mount the frame.

 

‹

To disassemble the unit, proceed as follows:

Remove the frame.

 

‹

Insert the right and left hand assembly key into the 

 

‹

respective slots on the sides of the unit. (The tabs are 

now bent back.)

Pull out the unit.

 

‹

 

If the housing is uneven, the tabs on the mounting 

 

►

sleeve may become jammed. Use the assembly keys 

to release the tabs.

 

Mounting sleeve, frame and mounting strip are not 

 

►

required.

Use the threaded mounting holes on the sides of the unit 

(A), to fasten the unit to the mounting brackets (supplied 

with your vehicle). The holes are labeled T (for Toyota) or 

N (for Nissan).

A

B

C

D

B

Loosen the mounting screws for the left and right 

 

‹

hand catches on the front of the unit and remove the 

catches.