Patton electronic SmartNode 4110 Series ユーザーズマニュアル

RIP configuration task list

SmartWare Software Configuration Guide 

The following example shows how to enable RIP learn host and default on IP interface wan.

node(cfg)#context ip router
node(ctx-ip)[router]#interface wan
node(if-ip)[wan]#rip learn host
node(if-ip)[wan]#rip learn default

This procedure describes how to enable receive RIP on an IP interface

Mode: Interface

Example: Enables an interface to receive RIP 

The following example shows how to enable receive RIP for IP interface lan.

node(cfg)#context ip router
node(ctx-ip)[router]#interface lan
node(if-ip)[lan]#rip listen

The RIP protocol supports announcing features, which are used to proclaim specific routing information to 
other elements in a network. The RIP announcing command is used for this purpose and offers options for

•

default—for RIP default routes,

•

host—for IP host routes,

•

self-as-default—for self as RIP default routes and

•

static—for static IP routes.

Depending on the RIP announcing method the last option for the command in 3 must be explicitly selected. It 
is possible to have more than one RIP announcing method enabled concurrently.

This procedure describes how to enable RIP announcing on an interface

Mode: Interface

Example: Enabling RIP announcing 

The following example shows how to enable the RIP default routes and IP host routes RIP announcing 
method on IP interface wan.

Enables receive RIP on IP interface name

Selects the RIP announcing 
method on interface name