Fujitsu P2X0-0202-01EN 사용자 설명서

Chapter 2 Setup

P2X0-0202-01EN ETERNUSmgr User Guide -Introduction-

Device Specific Setup Parameters (differences only)

2.2

Modifying the ETERNUSmgr Setup

This section explains how to change the setup of ETERNUSmgr for Solaris OS, Linux, or Windows®.
Use a text editor to modify the setup file. Any text editor can be used as none has been specified.

2.2.1

ETERNUSmgr for Solaris OS and Linux Procedure

This section explains what to do for the Solaris OS and Linux versions of ETERNUSmgr.
The procedure shown is for changing the settings that were set during installation.
This explanation uses ETERNUSmgr's default installation directory "/opt/FJSVgrmgr/" as an example.

Procedure

Confirm the contents of the installation directory.

Make sure that the necessary files and directories (stxchk, _STXPOLL.INI, STXPOLL_1.INI, stx-
poll, stxpolld, www/) have all been installed.

# ls /opt/FVSVgrmgr/

stxchk _STXPOLL.INI STXPOLL_1.INI stxpoll stxpolld www/

Edit the STXPOLL_1.INI file.

Vi editor is used here.

# vi /opt/FJSVgrmgr/STXPOLL_1.INI

When setting up multiple target devices, copy an existing setup file to make the setup easier. For details on
how to do this, see

"2.5 Monitoring Multiple Target Devices" (page 27)

Setting item

Parameter

Target Type

ETERNUS

GR710, GR720,

GR730,

ETERNUS3000

ETERNUS

GR740, GR820,

GR840,

ETERNUS6000

ETERNUS8000,
ETERNUS4000,

ETERNUS2000

Target Device
(may be changed)

TARGET_TYPE

Default setting is
"GR710",
"GR720",
"GR730", or
"ETERNUS3000"

Default setting is
"GR740",
"GR820",
"GR840", or
"ETERNUS6000"

Default setting is
"ETERNUS8000",
"ETERNUS4000",
or
"ETERNUS2000"

Target Flag (can-
not be changed)

TARGET_FLAG

Fixed at "1"

Fixed at "2"

Fixed at "4"