Alcatel Carrier Internetworking Solutions Switch/Router 사용자 설명서

Page 22-16

You create AutoTracker 

VLAN

s through the AutoTracker menu options. Creating an 

AutoTracker 

VLAN

 includes the following steps:

A. Enter basic information such as the name and number for the 

VLAN

B. Define policies that define membership in the 

VLAN

. See Step B. Defining and Configur-

C. Configure the type of routing used for communication between 

VLAN

s. In order for 

devices in a 

VLAN

 to communicate with devices in other 

VLAN

s, a virtual router must be 

configured or an external router must exist between those 

VLAN

s. See Step C. Configuring 

These steps are explained in detail in the sections that follow.

1. To begin setting up the AutoTracker VLAN type 

 at any prompt. 

2. The following prompt displays:

Enter the number for the Group to which this 

VLAN

 will belong. All 

VLANs

 belong to a 

Group. You can create up to 31 

VLANs

 per Group (each Group already contains a default 

VLAN

, 

VLAN #1

).

3. The following prompt displays:

Enter the number that will identify this 

VLAN

 with the Group specified above. Up to 32 

VLANs

 may belong to the same Group (including the default 

VLAN

). By default the system 

displays the next available 

VLAN ID

 number. Press 

 to accept this default. 

4. The following prompt displays:

Enter a textual description that will help you identify the 

VLAN

. For example, if you know 

this 

VLAN

 will be composed of only workstations using the 

IPX

 protocol, you might call 

the 

VLAN

, “

IPX VLAN

.” You may use up to 30 characters for this description.