Black Box DVI 사용자 설명서

 

10

Model AC2000A 

The AC2000A-S can be controlled via a serial device.  From the serial port, 
you have full control over the operation of the front-panel buttons plus 
many more capabilities.  Terminal emulator or ASCII software is required.  
An example is Microsoft Windows

 HyperTerminal (generally found in 

the START->Programs->Accessories->Communication folder) 

Most PCs and notebooks do not have a serial port. So to program 
the Switch you may need a USB to RS-232 Serial converter. 
These are available from Black Box. 

- 

Connect direct to COM1, COM2, or any available COM port 

- 

4800 Baud, 8 bits, No Parity, 1 Stop bit, No flow control 

- 

Settings per following figures: 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
To enter into the serial command mode after connecting this unit to 
the PC; the following text must be sent along with a carriage return 
(ENTER).