Black Box DVI 사용자 설명서

다운로드
페이지 24
 
 
11
DVI, Audio & RS-232 Extender with EDID Management 
11 
When successful, the main menu similar to below will be displayed. 
   MENU - Version 1.0 
----------------------------------------- 
 1 = DVI Local       | R = Read EDID Info 
 2 = UTP Remote      | B = Blank 
 3 = Emulate Default | U = Un-blank 
 4 = Emulate Learned | S = Status Report 
 L = Learn           | M = Menu 
 E = Enable boost    | Q = Quit 
 D = Disable boost   |  
----------------------------------------- 
 
3.2.2 Control Codes 
 
(1-byte commands from external control device) 
3.2.2.1 Select EDID Routing: 
To select EDID information to be routed to the video input device 
Command ........................................... Response  
ASCII 1 (or Hex 31) .................................................DVI-Local selected 
ASCII 2 (or Hex 32) ............................................. UTP-Remote selected 
ASCII 3 (or Hex 33) ........................................ Emulate Default selected 
ASCII 4 (or Hex 34) ....................................... Emulate Learned selected  
 
3.2.2.2 Learn EDID information: 
LEARN is used to store EDID information from either DVI-Local or UTP-
Remote connectors. This information is later sent to the device connected to 
the INPUT DVI device when requested. 
Command ........................................... Response  
ASCII l or L (Hex 6C or 4C)..........................................................Learn