Zhone 5100 참조 매뉴얼
User administration commands
Vpacket 5100/6100 Series Reference Manual
47
User administration commands
Table 2-4 lists the user administration commands.
Setting users
You can define up to five users for the 5100/6100 VDR system by issuing the set user add
command. You need to enter the new user’s name first. You can also assign the access level when
you issue the command. Next, you enter and confirm the password. If an access level is not
specified, it defaults to read. This command is restricted to users with root privileges.
Syntax: set user add <username> [access level]
Arguments:
Syntax: set user add <username> [access level]
Arguments:
username
an alphanumeric string of up to 15 characters and is case sensitive.
access level root, writeall, writevoice, writedata, writelink, or read (optional)
password
password
a case sensitive alphanumeric string of up to 15 characters
Example:
In this example, the new user, emmett_otter, is added with read only privileges. After the user and
access level are set, the 5100/6100 VDR prompts the administrator for a password for the new
user. The CLI does not display the password as the administrator enters it for security reasons.
Table 2-4. User administration commands
Group
Command
See...
User administration
set user add
set user delete
set user modify password
set user modify access
show user
show user table
VPacket# set user add emmett_otter read
Enter the new password :
Reenter the new password :
User name : emmett_otter
Access Level : read
VPacket#