Maytag mmv4205b 설치 설명서

You need to drill holes for the top support screws, a 
hole large enough for the power cord to fit through, 
and a cutout large enough for the exhaust adaptor.

•

Read the instructions on the TOP CABINET 
TEMPLATE.

•

Tape it underneath the top cabinet.

•

Drill the holes, following the instructions on the 
TOP CABINET TEMPLATE.

CAUTION: Wear safety goggles when drilling holes 
in the cabinet bottom.

Carefully pull out the blower unit. The wires will 
extend far enough to allow you to adjust the 
blower unit.

CAUTION: Do not touch blade of blower to prevent 
cracking and breaking. Hold outer case when the 
blower is removed and re-installed.

Roll the blower unit 90° so that fan blade 
openings are facing toward the top of the 
microwave.

Lift up the 
blower plate.

Remove and save 
screw that holds 
blower plate to 
microwave.

Screw

Back of 
Microwave

Blower Plate

Roll