3com MSR 20-20 참조 매뉴얼

# Configure the number of probes in an ICMP-echo test as 10.

<Sysname> system-view

[Sysname] nqa entry admin-test

[Sysname-nqa-admin-test] type icmp-echo

[Syaname-nqa-admin-test-icmp-echo] probe count 10 

probe packet-interval packet-interval

UDP-jitter test type view

packet-interval: Interval for consecutive packets sent, in milliseconds, in the range 
10 to 1000.

Use the probe packet-interval command to configure the interval for sending 
consecutive packets.

Use the undo probe-interval command to restore the default.

By default, the interval for sending consecutive packets is 20 milliseconds.

# Configure the interval for sending consecutive packets as 100 milliseconds.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type udp-jitter

[Syaname-nqa-admin-test-udp-jitter] probe packet-interval 100 

probe packet-number packet-number

UDP-jitter test type view

packet-number: Number of consecutive packets sent in a UDP-jitter test, in the 
range 10 to 1000.

Use the probe packet-number command to configure the number of 
consecutive packets sent in a UDP-jitter probe.

Use the undo probe packet-number command to restore the default.

By default, the number of consecutive packets in a probe is 10.