3com MSR 20-20 참조 매뉴얼

C

HAPTER

 149: NQA C

LIENT

 C

ONFIGURATION

 C

OMMANDS

# Configure the number of consecutive packets in a UDP-jitter probe as 100.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type udp-jitter

[Syaname-nqa-admin-test-udp-jitter] probe packet-number 100 

probe packet-timeout packet-timeout

UDP-jitter test type view

packet-timeout: Timeout time for waiting for responses in a UDP-jitter test, in the 
range 10 to 3600000 milliseconds.

Use the probe packet-timeout command to configure the timeout time for 
waiting for responses in a UDP-jitter test.

Use the undo probe packet-timeout command to restore the default.

By default, the timeout time in a UDP-jitter test is 3000 milliseconds.

# Configure the timeout time for waiting for responses in a UDP-jitter test as 100 
milliseconds.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type udp-jitter

[Syaname-nqa-admin-test-udp-jitter] probe packet-timeout 100 

probe timeout timeout

DHCP/DLSw/FTP/HTTP/ICMP-echo/SNMP/TCP/UDP-echo test type view

timeout: Timeout time in a probe except UDP-jitter probe, in milliseconds. For an 
FTP or HTTP probe, the value range is 10 to 86400000; for a DHCP, DLSw, 
ICMP-echo, SNMP, TCP or UDP-echo probe, the value range is 10 to 3600000.

Use the probe timeout command to configure the timeout time in a probe.

Use the undo probe timeout command to restore the default.

By default, the timeout time is 3000 milliseconds.