Cisco Cisco ONS 15310-MA SONET Multiservice Platform 설치 가이드
12
Upgrading the Cisco ONS 15310-MA to Release 7.2
78-17822-01
DLP- U52 Set the Date and Time
Step 1
Log into CTC.
Step 2
If the Java Plug-in Security Warning dialog box appears, choose one of the following options:
•
Grant This Session—Installs the public-key certificate to your PC only for the current session. After
the session is ended, the certificate is deleted. This dialog box will appear the next time you log into
the ONS 15310-MA.
the session is ended, the certificate is deleted. This dialog box will appear the next time you log into
the ONS 15310-MA.
•
Deny—Denies permission to install the certificate. If you choose this option, you cannot log into the
ONS 15310-MA.
ONS 15310-MA.
•
Grant always—Installs the public-key certificate and does not delete it after the session is over.
Cisco recommends this option.
Cisco recommends this option.
•
View Certificate—Allows you to view the public-key security certificate.
After you complete the security certificate dialog boxes, the web browser displays information about
your Java and system environments. If this is the first login, a CTC downloading message appears while
CTC files are downloaded to your computer. The first time you connect to an ONS 15310-MA, this
process can take several minutes. After the download, the CTC Login dialog box appears.
your Java and system environments. If this is the first login, a CTC downloading message appears while
CTC files are downloaded to your computer. The first time you connect to an ONS 15310-MA, this
process can take several minutes. After the download, the CTC Login dialog box appears.
Step 3
If you need to return to the software and database you had before activating Software R7.2, proceed with
the
the
.
Stop. You have completed this procedure.
NTP-U176 Revert to Previous Software Load and Database
Note
The tasks to revert to a previous load are not a part of the upgrade. They are provided here as a
convenience to those wishing to perform a revert after an upgrade. If you have performed all necessary
procedures up to this point, you have finished the software upgrade.
convenience to those wishing to perform a revert after an upgrade. If you have performed all necessary
procedures up to this point, you have finished the software upgrade.
Note
Before you upgraded to Software R7.2, you should have backed up the existing database at all nodes in
the network (this is part of the
the network (this is part of the
). Cisco
recommends that you record or export all critical information to your hard drive. If you need to revert to
the backup database, use the following tasks, in order.
the backup database, use the following tasks, in order.
Onsite/Remote
Onsite or remote
Security Level
Provisioning or higher
Purpose
This procedure restores the software and database provisioning you had
before you activated Software R7.2.
before you activated Software R7.2.
Tools/Equipment
PC or UNIX workstation
Prerequisite Procedures
NTP-U172 Prepare for Upgrade to Release 7.2, page 3
NTP-U173 Back Up the Software Database, page 5
NTP-U174 Upgrade to Software R7.2, page 6
NTP-U173 Back Up the Software Database, page 5
NTP-U174 Upgrade to Software R7.2, page 6
Required/As Needed
As needed
Onsite/Remote
Onsite or remote (but in the presence of the workstation)
Security Level
Superuser