Revel ic65 Guia Do Utilizador

 

2. Determine the correct 

speaker location and 
use the template 
included in the 
packing materials to 
mark the ceiling 
material.

Always allow at least a 
1/2-inch between the ceiling rafters 
and the speaker cut-out or the locking 
tabs will not have the space to swivel 
into place.

3. Ensure that the drywall, plywood, or 

other appropriate ceiling material is 
at least a 1/2-inch thick and capable 
of withstanding the weight of the 
speaker being installed.  

Cut the drywall along the speaker 
template marks made in Step 2.

4. Connect the speaker wires to the 

speaker.  Ensure that the polarity of 
each connection is correct.

5. Ensure that all four locking tabs are 

properly positioned against the lock-
ing tab stops, located on the speaker 
frame.

Carefully place the frame assembly 
into the ceiling, ensuring that there is 
no more than 1/8-inch play between 
the frame and the ceiling cutout.  

After positioning the speaker into the 
mounting location, back each screw 
out one full turn counterclockwise.

6. Screw down each of the four Phillips-

head screwdrivers, alternating 
between the four screws.  

The locking tabs will swivel into place 
and secure the unit to the rear surface 
of the ceiling panel.  Hand-tighten 
with a non-powered, straight-handle 
regular screwdriver only.   Ensure that 
the speaker is securely held in place 
and that all four locking tabs are 
firmly resting against the ceiling 
material.

7. Attach the metal grille 

and logo.