Revel ic65 Guia Do Utilizador

 

The Revel IW65 & IC65/80 loudspeakers 
can be painted to match any decor.  If you 
wish to change their color, the satin finish 
on the grille and frame will function as a 
primer coat.  Follow these instructions for 
proper painting procedure:

1. Before beginning, install the supplied 

plastic paint shield securely into the 
recess in the baffle.  The paint shield 
will protect the speaker components 
and baffle from paint residue.  

2. Gently remove the scrim cloth from 

the grille before painting.

3. Use a high-quality spray paint and 

apply a thin coat of color.  

4. A replacement scrim cloth is sup-

plied.  After the paint has dried, apply 
a light coat of spray adhesive to the 
inside of the perforated grille and 
attach a new scrim cloth.

5. Remove the paint shield from the 

baffle and re-attach the grille.

High-order filters result in steep cut-offs to 
reduce potential damage from “out-of-
band” frequencies. Combined with 
custom-designed transducers and high 
quality filter network components, this 
approach helps the IW65 & IC65/IC80 
loudspeakers to maintain their 
performance under extreme operating 
conditions. However, all loudspeakers 
have limits when it comes to continuous 
playback. To extend these limits, avoid 
playback at volume levels that result in 
distorted or strained sound.

If a subwoofer is in use in the system, the 
In-Wall or In-Ceiling loudspeakers should 
have crossovers at 80Hz or above.  Some 
AV receivers or processors are set by 
identifying the loudspeakers as “small”. 

To obtain warranty or non-warranty 
service, contact an authorized Revel 
dealer. Refer to the included Revel 
warranty card for warranty information.