Cisco Cisco Agent Desktop 8.5 Guia Da Instalação
Cisco CAD Installation Guide
134
March 31, 2014
Configuring an IP Communicator Phone
From Unified CM Administration, complete the following steps to configure an
IP Communicator soft phone.
IP Communicator soft phone.
1. Choose Device > Add a New Device. The Add a New Device window appears.
2. In the Device Type field, select Phone, and then click Next. The Add a New
Phone window appears.
3. From the Phone Type drop-down list, select IP Communicator, and then click
Next. The Phone Configuration window appears.
4. Complete the fields in the Phone Configuration window, then click Save. The
IP Communicator phone is inserted into the Unified CM database.
NOTE: In the Device Name field, enter the MAC address of the
computer on which the IP Communicator phone is installed, prefaced
by SEP (for example, SEP01123FF8AA84).
computer on which the IP Communicator phone is installed, prefaced
by SEP (for example, SEP01123FF8AA84).
NOTE: An IP Communicator phone registers with Unified CM only
when Agent Desktop is running on the agent PC.
when Agent Desktop is running on the agent PC.