Cisco Cisco Agent Desktop 8.5 Guia Do Utilizador
CAD Configuration Setup Utility
June 2007
33
Figure 3.
Cisco Agent Desktop Directory Services dialog box.
2. Ensure that the correct primary (and optional secondary) Directory Services IP
addresses are entered, and then click OK.
The Cisco Agent Desktop Configuration Setup tool is displayed with the
CallManager node selected.
CallManager node selected.
NOTE: You can press F6 to switch between the left and right pane,
and the up and down arrows to move up and down the navigation tree
in the left pane.
and the up and down arrows to move up and down the navigation tree
in the left pane.
3. Select the node you want to modify from the left pane, enter the new data in
the right pane, and then click Apply.
■
You can display the nodes in any order you wish.
■
If you modify something in a node, you must click Apply to save your
changes before you move on to another node.
changes before you move on to another node.
4. When you are done making your changes, choose File > Exit or click Close.
CAD Configuration Setup closes.
5. Stop and restart the CAD services and all desktops for the change to go into
effect.
Configuration Setup Windows
The following pages describe all of the windows in the CAD Configuration Setup utility.
The windows are described in alphabetical order.
The windows are described in alphabetical order.