Cisco Cisco Aironet 340 Ethernet Bridges Guia Do Utilizador
Installing the Aironet 340 Series Bridge 1 - 7
Í To Attach the 10Base5 (Thicknet) Cabling:
1.
Make sure the unit is powered off.
2.
Attach the transceiver connector to the 10Base5 AUI port as shown
in Figure 1.5.
3.
Slide the locking mechanism in place.
4.
Attach the other end of the transceiver drop cabling to an external
transceiver.
Í To Attach the 10BaseT (Twisted Pair) cabling:
1.
Make sure the unit is powered off.
2.
Plug the RJ-45 connector into the 10BaseT (Twisted Pair) port as
shown in Figure 1.6.
3.
Connect the other end of the Twisted Pair cabling to the LAN
connection (such as a hub or concentrator).
Figure 1.5 - Attaching 10Base5 (Thicknet) Cabling
Figure 1.6 - Attaching 10BaseT (Twisted Pair) Cabling
10Base2
10Base5
10BaseT
10Base2
10Base5
10BaseT