Pentax WG-10 Guia De Utilização
271
9
Ap
pen
dix
dix
Troubleshooting
Problem
Cause
Remedy
The camera will
not turn on
The battery is not installed Check if a battery is installed.
If not, install a battery.
The battery is installed
incorrectly
Check orientation of the battery.
Reinsert the battery according
to the +- symbols in the battery
compartment (p.34).
The battery is exhausted
Charge the battery.
No image appears
on the display
The camera is connected
to a computer
The display is off when the camera
is connected to a computer.
The camera is connected
to a TV
The display is off when the camera
is connected to a TV.
The display is set to off.
Press the 4/W button
to turn the display on.
The display
is hard to see
The brightness level of
the display is set too dark
Adjust the brightness level in
[Brightness Level] in the [W Setting]
menu. (p.232)
Power Saving function is on
When the Power Saving function
is on, the display automatically
darkens after a certain amount
of time. Press a button to return
to the normal brightness level.
Select [Off] in [Power Saving] in the
[W Setting] menu to turn the Power
Saving function off (p.233).
The shutter will
not release
The flash is charging
Pictures cannot be taken while
the flash is charging. Wait until
charging is finished.
There is no available space
on the SD Memory Card or
in the built-in memory
Insert an SD Memory Card with
available space or delete unwanted
Recording
Wait until recording is finished.
The picture is dark
when using
the flash
The subject is too far away
in a dark environment, such
as a night scene
The picture becomes dark
if the subject is too far away.
Take pictures within the specified
flash range.
WG10_OPM_ENG.book Page 271 Friday, February 1, 2013 5:30 PM