Puls ML50.100 Power Supply Guia De Especificação
ML50.100, ML50.109
MiniLine
24V, 2.1A, S
INGLE
P
HASE
I
NPUT
Mar. 2007 / Rev. 1.0 DS-ML50.100-EN
All parameters are specified at 24V, 2.1A, 230Vac, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.
All parameters are specified at 24V, 2.1A, 230Vac, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone +49 89 9278 0 Germany
13/20
21. A
PPROVALS
IEC
60950-1
IECEE
CB SCHEME
CB Scheme,
Information Technology Equipment
Information Technology Equipment
IEC
60601-1
IECEE
CB SCHEME
CB Scheme,
Medical, Basic Insulation
Medical, Basic Insulation
UL
508
IND. CONT. EQ.
LISTED as Industrial Control Equipment E198865
UL2601
LISTED as Medical
UL
60950-1
RECOGNIZED E137006 recognized for the use in U.S.A. (UL 60950-1) and Canada
(C22.2 No. 60950). Information Technology Equipment, Level 3
(C22.2 No. 60950). Information Technology Equipment, Level 3
NEC Class 2
Listed as Limited Power Source (LPS) in the UL 60950-1 UL report.
UL
1604
RECOGNIZED E246877 recognized for use in U.S.A. (UL 1604) and Canada (C22.2
No. 213-M1987) Hazardous Location Class I Div 2 T4 Groups A,B,C,D and
Class I Zone 2 Groups IIA, IIB and IIC
No. 213-M1987) Hazardous Location Class I Div 2 T4 Groups A,B,C,D and
Class I Zone 2 Groups IIA, IIB and IIC
The unit is suitable for use in Class I Division 2 Groups A, B, C, D locations as well as for Class I Zone 2
Groups IIA, IIB and IIC locations. Substitution of components may impair suitability for Class I Division 2
environment. Do not disconnect equipment unless power has been switched off. Wiring must be in
accordance with Class I, Division 2 wiring methods of the National Electrical Code, NFPA 70, and in
accordance with other local or national codes.
Groups IIA, IIB and IIC locations. Substitution of components may impair suitability for Class I Division 2
environment. Do not disconnect equipment unless power has been switched off. Wiring must be in
accordance with Class I, Division 2 wiring methods of the National Electrical Code, NFPA 70, and in
accordance with other local or national codes.
Marine
GL
ABS
GL (Germanischer Lloyd) classified and ABS (American Bureau for Shipping) PDA
for marine and offshore applications. Environmental category: C, EMC2
for marine and offshore applications. Environmental category: C, EMC2
SEMI
F47
SEMI F47-0200 Power Quality Star
Ride-through compliance for semiconductor industry.
Full SEMI range compliance (Input: 120Vac or 208Vac)
Ride-through compliance for semiconductor industry.
Full SEMI range compliance (Input: 120Vac or 208Vac)
22. F
ULFILLED
S
TANDARDS
EN 61558-2-17
Safety of Power Transformers
EN/IEC 60204-1
Safety of Electrical Equipment of Machines
EN/IEC 61131-2
Programmable Controllers
EN 50178, IEC 62103
Electronic Equipment in Power Installations
23. U
SED
S
UBSTANCES
Electrolytic capacitors included in this unit do not use electrolytes such as Quaternary Ammonium Salt Systems.
Plastic housings and other molded plastic materials are free of halogens, wires and cables are not PVC insulated.
The unit conforms to the RoHS directive 2002/96/EC
The materials used in our production process do not include the following toxic chemicals:
Polychlorinated Biphenyl (PCB), Pentachlorophenol (PCP), Polychlorinated naphthalene (PCN), Polybrominated
Biphenyl (PBB), Polybrominated Biphenyl Oxide (PBO), Polybrominated Diphenyl Ether (PBDE), Polychlorinated
Diphenyl Ether (PCDE), Polybrominated Diphenyl Oxide (PBDO), Cadmium, Asbestos, Mercury, Silica
Polychlorinated Biphenyl (PCB), Pentachlorophenol (PCP), Polychlorinated naphthalene (PCN), Polybrominated
Biphenyl (PBB), Polybrominated Biphenyl Oxide (PBO), Polybrominated Diphenyl Ether (PBDE), Polychlorinated
Diphenyl Ether (PCDE), Polybrominated Diphenyl Oxide (PBDO), Cadmium, Asbestos, Mercury, Silica