Adtran TRC4106 Manual Do Utilizador
Section 5, User Interface Guide
TRACER 4206 System Manual
60
© 2002 ADTRAN, Inc.
612804206L1-1B
>T1D S
TATUS
/C
ONFIGURATION
/L
OOPBACK
> S
IGNALING
Configure the framing format for the T1D link for both the local and remote TRACER 4106/4206 units.
The TRACER 4106/4206 transports T1D data across the link (as long as the T1D signal is properly timed).
Configure the framing format (using the
The TRACER 4106/4206 transports T1D data across the link (as long as the T1D signal is properly timed).
Configure the framing format (using the
S
IGNALING
menu) to enable the TRACER 4106/4206 to monitor
the incoming framing error events and indicate problems with the attached metallic service. The TRACER
4106/4206 supports both
4106/4206 supports both
ESF
and
D4
framing formats.
>T1D S
TATUS
/C
ONFIGURATION
/L
OOPBACK
> L
INE
C
ODE
Sets the line coding for the T1D link. The TRACER 4106/4206 supports
B8ZS
and
AMI
line coding.
>T1D S
TATUS
/C
ONFIGURATION
/L
OOPBACK
> L
OOP
/N
ORMAL
S
TATE
Controls the loop status of the T1D link. Activates/deactivates loopback conditions for testing purposes.
>T1D S
TATUS
/C
ONFIGURATION
/L
OOPBACK
> L
OOP
/N
ORMAL
S
TATE
> N
ORMAL
The T1D link is in normal data transport mode - there are no active loopbacks.
>T1D S
TATUS
/C
ONFIGURATION
/L
OOPBACK
> L
OOP
/N
ORMAL
S
TATE
> L
INK
Activates a loopback at the TRACER 4106/4206 T1D framer towards the wireless link (see Figure 21).
Use the
Use the
L
INK
loopback to test data path integrity from one unit across the wireless link.
Figure 21. T1D Link Loopback
>T1D S
TATUS
/C
ONFIGURATION
/L
OOPBACK
> L
OOP
/N
ORMAL
S
TATE
> L
INE
Activates a loopback at the TRACER 4106/4206 T1D framer towards the wireless link (see Figure 22).
Use the
Use the
L
INE
loopback to test data path integrity from the TRACER 4106/4206 unit to the T1 equipment.
Figure 22. T1D Line Loopback