ADC Telecommunications Inc. IRP1901A Manual Do Utilizador

© 2008, ADC Telecommunications, Inc.

ADCP-77-061 • Issue A • 08/2008 • Chapter 3 - Commissioning and Configuration

In this section, you configure the boot parameters to modify the IP address of the system. After 
changing the boot parameters, the chassis must be reset before the changes take effect.

1

If not already done, establish serial communications with the picoBTS as described in 

2

Once the picoBTS boots normally, press the 

[ENTER] 

key to show the prompt:

HD:iwbox->

3

Display the boot parameters, by typing:

bootChange [ENTER]

4

The boot parameters display individually after pressing the 

[ENTER] 

key. Each param-

eter can be modified by simply entering the new values after the existing value is 
displayed and pressing the 

[ENTER] 

key. You cannot use the backspace or delete keys in 

this window. Edit the parameter values using the following commands:

 shows the default bootChange parameters for the system. 

[ENTER]

Accepts the current parameter value and proceeds to the next parameter.

. [ENTER]

Erases the current parameter value and proceeds to the next parameter.

- [ENTER]

Returns to the previous parameter.

[CTRL][d]

Aborts all changes and reverts to the current values.

Preliminary