Wago 759-302 COMMISSIONING TOOL I/O-CHECK 2 759-302 Ficha De Dados

72  •    Operation (Overview) 

  

 

•  Connect the configuration interface with the attendant plug of the 

communication cable 750-920.  

•  Connect the D-Sub plug of the communication cable to a free serial 

interface of the PC. 

•  Switch on the voltage supply of the buscoupler / -controller again. 

 

You ca use the WAGO Radio Adapter 750-921 alternatively to the 
communication cable 750-920: 

•  Connect the WAGO Radio Adapter 750-921 with the configuration 

interface. 

•  Switch on the voltage supply of the buscoupler / -controller again. 
•  Start the Bluetooth

®

 software on your computer. 

 

•  Start WAGO-I/O-CHECK and select the command COM-Port ... from the 

menu Settings. 

•  Select the serial interface used in the dialog box COM-Port Settings and 

close the dialog with the OK button. 

 
WAGO-I/O-CHECK is now prepared for communication with the node. 

You can determine the node configuration in the following manner: 

•  Use the command Read Configuration from the menu Node or 
•  press function key <F5> or 

•  click to the icon 

 on the toolbar Node. 

 

Note: 
If the connected node contains digital I/O modules, these modules are 
described with a standard text. Use the command Rename from the menu 
Module or the button R

 from the toolbar Module to change the 

description of the digital I/O modules.