Monogram ZV800SJSS Instrução De Instalação

• Remove the hood from the box. Remove packaging

and tape.

• Remove one screw on each side of the cover on the

electrical panel. Lift off the cover and set aside with
screws.

• Stand the electrical panel upright.
• Align the screw holes in the bottom of the panel with

the holes on the base of the hood at the front side.

• Install 3 screws provided.
• Snap the damper into the

exhaust outlet on the top
of the hood.

Remove 2 side

cover screws

Secure

electrical panel

with 3 screws

Install

damper

• Lift the hood onto the mounting bracket.
• Check to be sure it is level.
• Install wood screws through the hood and into the

wall on each side of the mounting bracket. 

• Extend the canopy forward for better access to the

rear mounting screw holes.

• Install 2 wood screws or fasteners through the 

bottom of the hood into the wall.

Install a wood screw

on each side of the

mounting frame

Install bottom

mounting

screws

Electrical

panel

Junction box

Mounting

bracket

Inside screw