Справочник Пользователя для American Dryer Corp. AD-464

450260-1

www.amdry.com

Blower (Squirrel Cage Fan) Motor

Assembly _____________________________

Blower (Squirrel Cage Fan) Motor

Description

The dryer uses a 22-1/4 inch diameter blower (squirrel cage

fan). It rotates (spins) in a counterclockwise (CCW) direction,

when viewed at the blower motor.
The blower shaft is mounted on two (2) 1-3/4 inch diameter

pillow block bearings and is driven by two (2) BX type V-belts

which are connected to a 25 hp blower motor.
The blower motor is mounted on a adjustable base. The

motors position can be easily adjusted so that the proper

tension can be maintained on the V-belts.

Blower (Squirrel Cage Fan) Motor

Component Replacement

Blower Motor Replacement

1. Discontinue electrical service to the dryer.
2. Remove the belt guard.
3. Mark and identify the wires that will be disconnected for

proper reinstallation.

4. Loosen the bolts securing the blower motor to the motor

base; slide the blower motor forward. Remove the

V-belts. Remove the loosened bolts. Remove the

blower motor being replaced from the dryer.

5. Remove the bolts from the bushing.
6. Insert the bolts into the threaded holes.
7. Tighten the bolts evenly for motor pulley removal.
8. Mark the inside of the motors shaft before removing the

bushing.

9. Loosen the setscrews in the bushing.

MAN4272

Air Jet Valve

Air Jet Valve Replacement

Discontinue air supply to the dryer.

Discontinue electrical service to the dryer.

Remove the poly-flow tubing from the brass tee and the

brass cross.

Remove the stainless steel air jet tubing from the

pneumatic solenoid (air jet valve).

Remove the two (2) 1/4-20 x 2-1/4" hex head machine

screws mounting the air jet valve to the pneumatic panel.

Remove the screw securing the air jet coil harness from

the air jet valve.

To install new air jet valve, reverse Step #6 through Step

#3.

Reestablish electrical survive to the dryer.

Reestablish air supply to the dryer.