Справочник Пользователя для Majestic Appliances 360DVS2

12

FP1430

Fig. 8  Alternate switch location.

This appliance is shipped as a rear vent unit. If the 
installation layout requires the unit to be a top vent con-
figuration, the appliance can be converted by following 
the steps below.

1.  Remove the ten (10) screws securing the outer col-

lar adapter to the fireplace body. (Fig. 9)

2.  Set the collar aside, complete with the gasket.  

3.  Remove the insulation material (exposed in Step 

2) from the top of the unit. (Fig. 10) This material 
can be discarded; however, if the unit is converted 
back to rear-vent, a new piece of insulation material 
approved by CFM Corporation must be used for this 
purpose.

  NOTE: When converting appliance to top vent, 

ensure the insulation material referred to in step 3 is 
completely removed. 

4.  Remove the 4 screws securing the flue cover plate 

to the top of the intake box and remove the cover 
and gasket. (Fig. 11)

5.  Remove 4 screws securing the flue pipe to back of 

the intake box and remove pipe and gasket. (Fig. 11)

6.  Secure the plate and gasket removed in step 4 over 

the flue opening in the back of the intake box. En-
sure the gasket is in place and undamaged.

7.  Install the flue pipe and gasket removed in step 5 

over the flue opening in the top of the intake box.

8.  Refit the outer collar adapter and gasket to the unit 

with the round collar on the top. Secure the adapter 
with the 10 screws removed in step 1.

FP1431

top vent

remove screws

Remove These Screws

Remove 

These 

Screws

Outer Collar Adapter

FP1431

Fig. 9  Remove screws from outer collar adapter.

FP1432

remove flue cover

and pipe

Insulation Pad

(Must be removed)

Flue 

Pipe

FP1432

Fig. 10  Remove flue cover and pipe.

FP1433

flue cover plate

Flue Cover 

Plate

Flue 

Pipe

FP1433

Fig. 11  Flue pipe removal.