Справочник Пользователя для Mitsubishi Electronics 60/60S

Скачать
Страница из 559
2.  Monitor 
2.5  Resuming the Program 
 
 
 
I-56 
 
Display item 
Details 
 
O  31000  N  1- 2 
<SUB>  O 
N    -  
This displays the restart searched position (program No., sequence No., 
block No.). If a subprogram is searched, those numbers also display. 
  [RESTART- (G54)] 
  X 
-130.000 
  Y 
-10.000 
  Z 
0.000 
  C 
0.000 
This displays the remaining distance when the restart search is 
completed. 
  [RESTART-R] 
  X 
-130.000 
  Y 
-10.000 
  Z 
0.000 
  C 
0.000 
This displays the position on the local coordinate system when the restart 
search is completed. 
N6 Y-70.; 
N7 X-20.; 
This displays two blocks of the restart searched program. 
 
O(         ) 
N(     ) 
-(    ) 
 
<Setting range>
1 to 99999999 
0 to 99999 
0 to 99 
These set the program number, sequence number 
and block number to be searched. 
For type A, the program No. cannot be omitted. 
For type B, the program No. cannot be input. 
P(    ) 
 
0 to 9999 
This sets the number of times the search block 
appears. When, for instance, a block in the 
subprogram is to be searched, the search block will be 
executed a multiple number of times when that 
subprogram is called for a similar number of times, 
and so the number of times the block is to be executed 
is set here. 
There is no need to set this when a one-time 
execution is to be searched or when the search block 
is to be executed only once. 
If 0 is set, a one-time execution is searched. 
This designates an unmodal search. 
This designates a type 1 restart search. 
This designates a type 2 restart search. 
T(  ) 
 
This designates a type 3 restart search. 
(This designates T command restart.) 
This designates memory search. 
M(  ) 
This designates tape search. 
T-SELECT T 
 
S-SPEED S1 
S-SPEED S2 
2nd AUX 
 
AUX 
M   
This displays the tool command value. 
This displays the 1st spindle rotation speed command value. 
This displays the 2nd spindle rotation speed command value. 
This displays the last four digits of the 2nd miscellaneous function 
command value. 
This displays the last four digits of the miscellaneous function command.