Справочник Пользователя для Panduit DPOE12U1XY
PANDUIT® DPoE™ Power Patch Panel User’s Guide
Issue 2.2
Part Number: PN378A
17
OPERATION
LED Indicators
The DPoE™ Power Patch Panel displays system and port status through the use of LEDs on the front
and rear of each panel. There is one panel status LED on the front left of the panel, 24 individual port
status LEDs above each port, and twonetwork status LEDs on the rear of the unit. These LEDs enable
the technician to see at a glance if either the ports or the panel itself is in alarm. (See page 5, Figure 1:
DPoE™ Power Patch Panel (Front View) and page 6, Figure 2: DPoE™ Power Patch Panel (Rear View)
for a graphical view of the LEDs on the DPoE™ Power Patch Panel.)
The following tables do not include the LED status during powering up the unit. (See page 15, Table 6:
DPoE™ Power Patch Panel Power Up Sequence, for more information on the LED indications during
power up.
and rear of each panel. There is one panel status LED on the front left of the panel, 24 individual port
status LEDs above each port, and twonetwork status LEDs on the rear of the unit. These LEDs enable
the technician to see at a glance if either the ports or the panel itself is in alarm. (See page 5, Figure 1:
DPoE™ Power Patch Panel (Front View) and page 6, Figure 2: DPoE™ Power Patch Panel (Rear View)
for a graphical view of the LEDs on the DPoE™ Power Patch Panel.)
The following tables do not include the LED status during powering up the unit. (See page 15, Table 6:
DPoE™ Power Patch Panel Power Up Sequence, for more information on the LED indications during
power up.
Table 8: Panel Status LED Indications
LED Color
Panel LED
Status
Status
Description
Status of Power Ports
Off
Off
No Power is being supplied to the
panel.
panel.
Power is NOT being
delivered to the ports on
the panel.
delivered to the ports on
the panel.
Green
Flashing
System operating normally.
Power may be delivered
down the ports on the
panel, as configured.
down the ports on the
panel, as configured.
Amber
Solid
Out of voltage range condition.
Less than 46VDC or more than
57VDC is being supplied to the
panel.
Less than 46VDC or more than
57VDC is being supplied to the
panel.
Power is NOT being
delivered to any ports on
the panel.
delivered to any ports on
the panel.
Red
Solid
The main processor on the panel is
NOT operating properly and power
is NOT being delivered to any ports
on the panel.
NOT operating properly and power
is NOT being delivered to any ports
on the panel.
Power may or may NOT
be delivered to any ports
on the panel, as
configured.
be delivered to any ports
on the panel, as
configured.
Table 9: Port Status LED Indications
LED Color
Port LED Status
Description
Status of Power Ports
Off
Off
No Powered Device (PD) is
connected to this particular port on
the panel.
connected to this particular port on
the panel.
Power is NOT being
delivered down this port on
the panel.
delivered down this port on
the panel.
Amber
Solid
The panel is determining the PD's
power requirements. This occurs
for 5 seconds after the PD is
connected.
power requirements. This occurs
for 5 seconds after the PD is
connected.
Power is NOT being
delivered down this port on
the panel.
delivered down this port on
the panel.
Green
Solid
Port is providing power.
Power is being delivered
down this port on the
panel.
down this port on the
panel.