Справочное Руководство для Netopia r3100-u

This chapter describes how to use the Netopia R3100’s Smar tPhone™ feature. To see whether your Netopia 
Router suppor ts Smar tPhone, look for the two RJ-11 jacks, marked Phone 1 and Phone 2, on the back of the 
router. If your Netopia R3100 does not suppor t Smar tPhone, you can skip this chapter. With Smar tPhone, other 
analog devices such as telephones, facsimile machines, or modems can connect to the Netopia R3100 and 
communicate over the same lines. The Netopia R3100 with Smar tPhone provides:

■

auxiliar y telephone control, allowing management of whether an attached phone can pre-empt or inter fere 
with a Netopia R3100 data call. This is also called Call Bumping.

■

off-hook detection, preventing the Netopia R3100 from initiating data calls when the ISDN line is busy with 
a voice call

■

distinctive ring patterns to identify incoming caller

■

Bellcore specification Caller ID suppor t for call authentication

■

call hold, call retrieve and the Flexible Call Offering (FCO) features known as Conference, Drop, and 
Transfer

Note: Outside Nor th America your telephone provider may not use Bellcore specification equipment, thus 
disabling this feature. Caller ID is received as universally recognizable D channel traffic. The Netopia 
R3100 generates Bellcore Caller ID to the POTS jacks, which may not be the same encoding as non-Nor th 
American PTTs use. Therefore an external caller ID box may not work. The Netopia R3100 generates the 
distinctive ring from the inbound caller ID.

Topics in this chapter include:

■

■

■

You can configure telephone connections in the Telephone Connections screen, located in the System 
Configuration screen under Telephone Setup.

Main

Menu

System

Configuration

Telephone

Setup