Краткое Руководство По Установке для Ricoh ap204

NetWare 3.x Configuration

33

❒ If you use a currently defined print queue, proceed to the step 

L.

A In the 

B Press {{{{

}}}} and input a print queue name.

C Press {{{{

}}}} to return to the 

M

Create a printer as follows.
A In the 

B To create a new print server, press {{{{

}}}} and input a print server name.

If you use an currently defined print server, select one of the print servers
shown in the 

 list.

❒ Use the same name as that specified in the NIB Setup Tool. (Step 

H-A).

C In the 

D In the 

E Select the printer which is indicated as “Not Installed”.

❒ Use the same number as that specified as Remote Printer No. using the

NIB Setup Tool. (Step 

H-D)

F If you change the name of the printer, input a new name.

“Printer x” is assigned to the printer according to the number of the select-
ed printer.

G As Type, select 

The IRQ, Buffer size, Starting form, and Queue service mode are automat-
ically configured.

H Press {{{{

}}}}, and click 

I Press {{{{

}}}} to return to the 

N

Assign print queues to the created printer as follows.
A In the 

B Select the printer created in the Step LLLL.
C Press {{{{

}}}} to select a queue serviced by the printer. 

❒ You can select more than one queue at a time.

D Follow the instructions on the screen to make other necessary settings.

When you have finished the above steps, make sure that the queues are as-
signed.

O

{{{{

}}}} until “Exit?” appears, and Select