Краткое Руководство По Установке для Ricoh ap204
NetWare 3.x Configuration
31
3
Important
❒ Use the same name as that specified in the NIB Setup Tool. (Step
H-A).
C In the
[Print Server Information]
menu, select
[Print Server Configuration]
.
D In the
[Print Server Configuration menu]
, select
[Printer Configuration]
.
E Select the printer which is indicated as “Not Installed”.
F If you change the name of the printer, input a new name.
F If you change the name of the printer, input a new name.
“Printer x” is assigned to the printer according to the number of the select-
ed printer.
ed printer.
G As Type, select
[Remote Paralle, LPT1]
.
The IRQ, Buffer size, Starting form, and Queue service mode are automat-
ically configured.
ically configured.
H Press {{{{
Esc
}}}}, and click
[Yes]
in the confirmation dialog.
I Press {{{{
Esc
}}}} to return to the
[Print Server Configuration Menu]
.
N
Assign print queues to the created printer as follows.
A In the
A In the
[Print Server Configuration Menu]
, select
[Queues Serviced By Printer]
.
B Select the printer created in the Step LLLL.
C Press {{{{
C Press {{{{
Insert
}}}} to select a queue serviced by the printer.
Note
❒ You can select more than one queue at a time.
D Follow the instructions on the screen to make other necessary settings.
When you have finished the above steps, make sure that the queues are as-
signed.
signed.
O
Press
{{{{
Esc
}}}} until “Exit?” appears, and Select
[Yes]
to exit PCONSOLE.
P
Turn the printer power off and on.
Note
❒ To confirm if the printer is configured correctly, enter as follows from the
command.
F:> USERLIST
❒ If the printer works as configured, the name of the print server appears as
an attached user.
Setting Up as Remote Printer
A
Log in to the print server as a Supervisor or a Supervisor equivalent.
B
Run the NIB Setup Tool.