Руководство По Проектированию для Cisco Cisco Aironet 350 Mini-PCI Wireless LAN Client Adapter
10-27
Enterprise Mobility 4.1 Design Guide
OL-14435-01
Chapter 10 Cisco Unified Wireless Guest Access Services
Guest Access Configuration
Figure 10-26
Selecting WLAN Mobility Anchor
Verifying the Guest WLAN Mobility Anchor
Once configured, the screen shown in
shows the mobility anchor (selected from above),
assigned to the Guest WLAN.
Figure 10-27
Verifying the Guest WLAN Mobility Anchor
For ease of verification, the page displays whether or not the mobility tunnel data path and LWAPP
control path have been established with the anchor. If either or both show “down”, see
control path have been established with the anchor. If either or both show “down”, see
for troubleshooting tips. The pull-down selection list to the right offers the
option to send a ping to the destination anchor WLC.
Step 5
When finished, click Back.
Step 6
Repeat the steps above for each additional anchor WLC being deployed (guest N+1 redundancy).
This completes the guest WLAN configuration. Repeat all steps from
through
for each
additional foreign WLC that will support the guest WLAN.
Guest WLAN Configuration on the Anchor WLC
Guest WLAN configuration on the anchor controller(s) is identical to that of the foreign controller
except for minor differences in the WLAN interface and mobility anchor configuration, which are
detailed below.
except for minor differences in the WLAN interface and mobility anchor configuration, which are
detailed below.
Note
The SSID defined for the guest WLAN must be exactly the same as what is defined on the foreign WLCs.