Руководство По Проектированию для Cisco Cisco Aironet 350 Mini-PCI Wireless LAN Client Adapter
10-29
Enterprise Mobility 4.1 Design Guide
OL-14435-01
Chapter 10 Cisco Unified Wireless Guest Access Services
Guest Account Management
Figure 10-29
Defining the Guest WLAN Mobility Anchor
Note that the guest WLAN mobility anchor is local. (See
.)
Figure 10-30
Verifying Guest Mobility Anchor
Because the mobility anchor for the guest WLAN is the anchor WLC itself, the Data and Control Path
status will always show “up”. If not, check to ensure that you have selected the local WLC as the anchor
from the 'Switch IP Address (Anchor) drop down menu.
status will always show “up”. If not, check to ensure that you have selected the local WLC as the anchor
from the 'Switch IP Address (Anchor) drop down menu.
Step 5
If guest N+1 redundancy is being implemented, repeat the WLAN configuration for each additional
anchor WLC being deployed. Otherwise, this completes the configuration steps required to create the
guest WLAN on the anchor WLC.
anchor WLC being deployed. Otherwise, this completes the configuration steps required to create the
guest WLAN on the anchor WLC.
Guest Account Management
•
If guest credentials are going to be managed locally on the anchor controller, there are two methods
by which they can be created and applied:
by which they can be created and applied:
•
Through a WCS lobby ambassador admin or super user/root admin account
•
Directly on the controller via a local lobby admin account or other management account with
read/write access
read/write access