Руководство По Проектированию для Cisco Cisco Aironet 350 Mini-PCI Wireless LAN Client Adapter
10-28
Enterprise Mobility 4.1 Design Guide
OL-14435-01
Chapter 10 Cisco Unified Wireless Guest Access Services
Guest Access Configuration
Anchor WLC—Guest WLAN Interface
As indicated above, the parameters configured for the guest WLAN on the anchor WLC are the same
except the interface to which the WLAN is mapped. In this case, the guest WLAN is assigned to an
interface/VLAN on the anchor WLC, which connects to an interface on a firewall or Internet border
router.
except the interface to which the WLAN is mapped. In this case, the guest WLAN is assigned to an
interface/VLAN on the anchor WLC, which connects to an interface on a firewall or Internet border
router.
Step 1
Click the WLANs tab.
Step 2
Create, configure, and enable the guest WLAN the same way it was configured on the foreign WLC(s)
except for the following:
except for the following:
In the WLANs general configuration, under Interface, choose the interface name created in
. (See
.)
Step 3
Click Apply.
Figure 10-28
Anchor WLC Guest WLAN Interface Configuration
Anchor WLC—Defining the Guest WLAN Mobility Anchor
The second parameter that differs in configuration from the foreign WLC is the WLAN mobility anchor
configuration. The guest WLAN mobility anchor is the anchor WLC itself.
configuration. The guest WLAN mobility anchor is the anchor WLC itself.
Step 1
Click the WLANs tab.
Step 2
Find the Guest WLAN and click Mobility Anchors.
Step 3
From the pull-down selection list, choose the IP address representing the anchor controller. The IP
address has (Local) next to it.
address has (Local) next to it.
Step 4
Click Mobility Anchor Create. (See