Руководство По Установке для Cisco Cisco 5760 Wireless LAN Controller

One power supply unit is installed in slot 1 at the factory. You can order a second power supply unit and 
install it in slot 2.

The power supplies do not have an on/off switch and can only be powered down by removing AC input.

If only one power supply will be used, you must use the supplied blank faceplate to cover the empty 
power slot.

All power supply modules have internal fans. All controllers ship with a blank cover in the second power 
supply slot. 

 describes the supported internal power supply module.

The 350-W AC power supply module is an autoranging unit that supports input voltages between 100 
and 240 VAC. 

The power supply module uses an 18- AWG power cord for connection to an AC power outlet. 

If no power supply is installed in a power supply slot, install a power supply slot cover (

PWR-C1-350WAC=

350-W AC power supply module

PWR-C1-BLANK

Blank cover

350-W AC power supply module

Release latch

AC OK LED

Power cord retainer

PS OK LED

Keying feature

AC power cord connector

334377