Справочник Пользователя для National Instruments FP-3000
Chapter 4
Block Reference
©
National Instruments Corporation
4-13
FP-3000 Specific Parameters
CFG_OPTS
An option in the I/O function blocks to automatically set the scaling or alter
the block behavior. Generally, this option can make configuration easier.
the block behavior. Generally, this option can make configuration easier.
DEV_OPTS
A list of device-wide options that can be turned on and off at will. The
current firmware supports only one option.
current firmware supports only one option.
EXECUTION_STATISTICS
A repository containing performance statistics for a given block. Use
EXECUTION_STATISTICS
to asses the performance of a given
configuration and allow appropriate changes to be made.
Table 4-7. Configuration Options
Option
Description
Automatically Adjust
XD_SCALE
Enabling this option allows the block to
automatically determine its
automatically determine its
XD_SCALE
parameter, based on the physical I/O channel
range, which is set by parameters such as
range, which is set by parameters such as
FP_AI_100
range.
Ignore Unconnected
Interlock Inputs
Interlock Inputs
By default, all interlock inputs on the CDO
block must be good, or the block enters fault
state. Enabling this option allows inputs with
a status of
block must be good, or the block enters fault
state. Enabling this option allows inputs with
a status of
Bad::Not_Connected
to be
ignored.
Table 4-8. Device Options
Options
Description
Disable
CFG_OPTS
in all
I/O blocks
This bit disables all block configuration
options in
options in
CFG_OPTS
. It is not
recommended that this bit be set since the
additional behavior can make configuration
easier.
additional behavior can make configuration
easier.