Справочник Пользователя для Samsung iDCS 100
13
INTERCOM CALLS
CALLING OTHER STATIONS
•
Dial the extension number or group number.
•
Wait for the party to answer. If you hear a brief tone burst instead of ring-
back tone, the station you called is set for Voice Announce or Auto
Answer. Begin speaking immediately after the tone.
back tone, the station you called is set for Voice Announce or Auto
Answer. Begin speaking immediately after the tone.
•
Finish the call by replacing the handset or pressing the ANS/RLS or the
MONITOR key if you are using a 7B phone.
MONITOR key if you are using a 7B phone.
NOTES:
1.
1.
If you have a DSS key assigned to an extension or station group, you
may press this key instead of dialing the number. If you are using a 7
Button Set you must pick up the handset to speak to the calling party.
may press this key instead of dialing the number. If you are using a 7
Button Set you must pick up the handset to speak to the calling party.
2.
If the Hot Keypad feature has been turned off, you must first lift the hand-
set or press the SPK or the MONITOR key if you are using a 7B phone
before you begin dialing.
set or press the SPK or the MONITOR key if you are using a 7B phone
before you begin dialing.
ANSWERING INTERCOM CALLS
•
When your keyset rings, simply lift the handset—OR—press the
ANS/RLS key to be connected to the calling station. If you are using a
7B phone you must pick up the handset to speak to the calling party.
ANS/RLS key to be connected to the calling station. If you are using a
7B phone you must pick up the handset to speak to the calling party.
•
Finish the call by replacing the handset or pressing the ANS/RLS or the
MONITOR key if you are using a 7B phone.
MONITOR key if you are using a 7B phone.
VOICE ANNOUNCE MODE
(INTERCOM CALLS ONLY)
(INTERCOM CALLS ONLY)
When another station calls you, your keyset will sound a brief attention tone
and you will hear the caller’s announcement.
and you will hear the caller’s announcement.
•
Press ANS/RLS to turn on the microphone and speak handsfree—OR—
lift the handset to reply.
lift the handset to reply.
•
To finish the call, replace the handset or press the ANS/RLS key.
•
While you are listening to confirmation tone, press the HOLD key. This
will cancel the oldest set callback.
will cancel the oldest set callback.
NOTES:
1.
1.
If the hot keypad feature is turned off, you must first lift the handset or
press the SPK or the MONITOR key if you are using a 7B phone before
dialing.
press the SPK or the MONITOR key if you are using a 7B phone before
dialing.
12
HOME PAGE
Table of Contents
Guide-Contents