Roland VS-1824 用户手册

Chapter 8

8. Make the settings for the effects. 

Use [

], [

], [

], and [

] to move the 

cursor and the TIME/VALUE dial to adjust each of the 
values. Press [F3 (FX A)] to make settings to EFFECT A 
(FX1/2); press [F4 (FX B)] to make settings to EFFECT B 
(FX3/4).

fig.02-21

9. Press F2 (STEP 

→

)]. You can return to the previous 

screen by pressing [F1 (STEP

←

)].

10. Decide whether or not to record the output of each effect 

to a track. First, press the Effect SELECT button for Effect 
1 or Effect 2, then press the STATUS button for the track 
you want the effect recorded on. To select FX 3 or FX 4, 
hold [SHIFT] and press the Effect SELECT button. 

fig.02-22

11. Press [F2 (STEP 

→

)]. You can return to the previous 

screen by pressing [F1 (STEP

←

)].

12. Select mixer channels to be output to the AUX bus. 

The AUX bus is useful for creating a separate headphone 

mix for the performer you are recording. Use [

], 

[

], [

], and [

] to move the cursor and the 

TIME/VALUE dial to adjust each of the values.

fig.02-23

13. Press [F2 (STEP 

→

)]. You can return to the previous 

screen by pressing [F1 (STEP

←

)].

14. Select the Master Section settings. 

Use [

], [

], [

], and [

] to move the 

cursor and the TIME/VALUE dial to adjust each of the 
values.

fig.02-24

15. Press [F4 (Exec)]. “EZ ROUTING Step Edit is finished!!” 

appears in the display.

 EZ Routing settings will override any existing 

mixer settings you have already made.

16. You can save your setup as an EZ Routing template, or 

Exit [F6 (EXIT)] to leave this display without saving. To 
save the setup, press [F3 (SAVE)]. The Routing Save 
screen appears in the display. Save the setup using the 
procedure described in “Saving an EZ Routing 
Template,” p. 123.

Effect Switch

Send Level

Send Balance

Cursor

Tracl to be recorded

AUX Switch

AUX Send Switch

AUX Send Pan/Balance

Cursor

Monitor Select

Equalizer Mode

Direct Out

Effect Insert