Roland XV-88 用户手册

4. Press

, move the cursor to “Motif,” and specify the 

order in which the notes of the chord will be sounded.

The available choices depend on the Style parameter 
setting. For details, refer to 

5. Move the cursor to “Beat Pattern,” then change the 

rhythm.

The available choices depend on the Style parameter 
setting. For details, refer to 

6. Press

, move the cursor to “Accent Rate,” and 

specify the groove ratio.

A setting of 100% will produce the most pronounced 
groove feel.

7. Move the cursor to “Shuffle Rate” and specify the swing 

rate.

With a setting of 50%, the notes will be spaced evenly. 
As the value increases, the note timing will have more of 
a “swing” feel.

8. Press

, move the cursor to “Key Velocity,” and 

specify the strength with which the notes of the chord 
will be sounded.

When REAL is selected, the velocity at which the notes 
are actually played will be used. With a setting of 1–127, 
the specified velocity value will be used regardless of the 
force with which you play the chord.

9. When playing in Layer Performance, move the cursor to 

“Zone” and specify the Zone linked to the part playing 
arpeggios.

Arpeggios will be played only in the Zone and linked 
Part specified here. Chords will sound exactly as played 
in other Zones.

10. Move the cursor to “Tempo” and specify the speed of an 

arpeggio.

11. After you finish making settings, press [EXIT].

The 

 is an easy-to-use controller you can 

operate just by moving your hand over it. By changing the 
function assigned to the controller, you can add a variety of 
different effects to the sound. The controller lets you add 
effects such as instantaneous changes in tone that are 
impossible to do with knobs and sliders.

The D Beam Controller is provided under license from 
Interactive Light, Inc.

When selecting a Single Performance, the effect is 
applied to the single specified Part (current Part). When 
a Layer Performance is selected, the effect is applied to 
all Zones with Local switches set to ON and their linked 
Parts.

Tone changes made with the D Beam controller can also 
be sent to an external MIDI device (p. 59).

1. Make sure that the PLAY page of the sound generator 

mode (PERFORM, PATCH, RHYTHM, or GM) is 
displayed.

2. Press D BEAM CONTROLLER [ON] to turn on the D 

Beam Controller.

3. When changing the function to be controlled with the D 

Beam Controller, hold down [ON] to display the D 
BEAM CONTROL page, move the cursor to “Assign,” 
then make the setting.

fig.04-16

This setting is linked with the Assign parameter.

Assign parameter (SYSTEM/D BEAM/D BEAM 
CONTROL) (p. 176)

Assign parameter (ZONE/D BEAM/D BEAM 
CONTROL) (p. 63)

For more detailed information on the functions that can 
be controlled, refer to (p. 63, p. 176).