Q-Logic 8100 SERIES 用户手册

C–Brocade CEE/FCoE Switch/Blade Configuration

Configure LLDP/DCBX for FCoE

FE0254601-00 A

C-5

6.

Verify the CEE-MAP configuration by issuing the following command:

(config)# do show cee maps
CEE Map demo
   Precedence 1
   Priority Group Table
     1:  Weight 50, PFC Enabled, TrafficClass 3, BW% 40
     2:  Weight 50, PFC Disabled, TrafficClass 6, BW% 60
     15.0: PFC Disabled
     15.1: PFC Disabled
     15.2: PFC Disabled
     15.3: PFC Disabled
     15.4: PFC Disabled
     15.5: PFC Disabled
     15.6: PFC Disabled
     15.7: PFC Disabled
   Priority Table
      CoS:    0    1    2    3    4    5    6    7
     ---------------------------------------------
     PGID:    2    2    2    1    2    2    2    2
   FCoE CoS: None
   Enabled on the following interfaces

For information about associating the CEE-MAP with interfaces, refer to 

To configure the LLDP/DCBX for FCoE:

1.

Enable LLDP by issuing the following command:

(config)# protocol lldp

2.

Enable the switch to advertise the DCBX FCoE application TLV by issuing 
the following command:

(config)# advertise dcbx-fcoe-app-tlv

3.

Enable the switch to advertise the DCBX FCoE logical link TLV by issuing 
the following command:

(config)# advertise dcbx-fcoe-logical-link-tlv