Zhone 2208 用户指南
4-6
2 0 0 0 - A 2 - G B 2 1 - 0 0
Figure 4.5
SDSL Configuration Menu
NOTICE:
The options you see on the SDSL Configuration menu depend on the
specific DSLAM.
specific DSLAM.
Toggle SDSL Mode
(CPE or CO)
To select CPE or CO Mode, follow the steps below.
1
Type “1” on the SDSL Configuration menu (Figure 4.5). The IAD displays
the current SDSL Mode and prompts you to change it.
2
Type “1” to select CO, or type “2” to select CPE. The IAD sets the mode
and redisplays the SDSL Configuration menu.
NOTICE:
The CO Mode is reserved for testing. CPE is the normal mode.
Set SDSL Speed to
Auto Cycle (Nokia)
To select Auto Cycle - Nokia DSLAM, type “2” on the SDSL Configuration
menu to set the SDSL speed to Auto Cycle for connecting to a Nokia
DSLAM.
The IAD saves the configuration and redisplays the SDSL Configuration
menu.
DSLAM.
The IAD saves the configuration and redisplays the SDSL Configuration
menu.
Set SDSL Speed to
Auto Sense (Copper
Mountain)
To select Auto Sense
− Copper Mountain DSLAM, type “3” on the SDSL
Configuration menu (Figure 4.5) to set the SDSL speed to Auto Sense for
connecting to a Copper Mountain DSLAM. The IAD saves the configuration
and redisplays the SDSL Configuration menu.
connecting to a Copper Mountain DSLAM. The IAD saves the configuration
and redisplays the SDSL Configuration menu.
Enable/Disable
Conexant Autobaud
Mode
1
Type “4” on the SDSL Configuration menu (Figure 4.5) to enable or
disable Conexant Autobaud mode. The IAD displays the current setting and
prompts you to change it.