Zhone 2208 用户指南

C o n f i g u r a t i o n

Type “E” to enable or “D” to disable Autobaud mode. The IAD saves the 

configuration and redisplays the SDSL Configuration menu. 

To set the SDSL Sync Delay (Lucent), follow the steps listed below.

Type “5” on the SDSL Configuration menu (Figure 4.5) to enable Sync 

Delay, which is paired with Conexant Autobaud mode. The IAD displays 

the current Autobaud setting and prompts you to change it.

Type “E” to enable or “D” to disable Autobaud mode. If you disable 

Autobaud, you must set the SDSL data rate manually. The IAD prompts 

you to enter the SDSL Rate.

Enter the rate (144 to 2320 kbps, evenly divisible by 8) and press Enter.

The IAD saves the configuration and redisplays the SDSL Configuration 

menu.

Type “6” on the SDSL Configuration menu (Figure 4.5) to set the IAD to 

CPE Mode for connecting to an AccessLan DSLAM. The IAD saves the 
configuration and redisplays the SDSL Configuration menu.

Type “7” on the SDSL Configuration menu (Figure 4.5) to set the SDSL 

first-try speed for connecting to an IMAS (Nortel) DSLAM. The IAD 

displays the IMAS First Speed Option menu (Figure 4.6).

Type the option to select the appropriate SDSL speed. 

The IAD saves the configuration and redisplays the SDSL Configuration 
menu.

Type “8” on the SDSL Configuration menu (Figure 4.5) to set the SDSL 

speed manually. The IAD prompts you to enter the SDSL Data Rate.

Type the rate (144 to 2320 kbps, evenly divisible by 8) and press Enter. The 

IAD asks you if you wish to set Data to Framed Mode.

Enter “Y” for Framed Mode, or any other character if you are connecting to 

a DSLAM other than a Nokia DSLAM.