LXE hx3 参考指南
22
Power Key Functions
HX3 Reference Guide
E-EQ-HX3RG-C
Power Key Functions
See Also:
Sections titled LED Indicators and System Status LED later in this guide.
• If installed and pre-configured, the wireless client connects automatically during
each reboot.
• If installed and pre-configured, Bluetooth re-connects to nearby paired devices
automatically at the conclusion of each reboot.
• If installed and pre-configured, Wavelink Avalanche connects remotely and
downloads updates automatically during each reboot.
Hardware Reset
Press and hold the Power key for approximately 15 seconds then release the key. After releasing
the Power key, the Status LED lights solid green to indicate the HX3 is rebooting.
the Power key, the Status LED lights solid green to indicate the HX3 is rebooting.
If user data was not saved before the Hardware Reset function started, data loss occurs and
unsaved registry settings are lost. User data is saved whenever a Suspend/Resume function is
complete.
unsaved registry settings are lost. User data is saved whenever a Suspend/Resume function is
complete.
Note:
The hardware reset terminates the ActiveSync connection. The ActiveSync connection
must be re-established after the HX3 boots.
must be re-established after the HX3 boots.
Warm Boot
This action requires an ActiveSync connection and LXEConnect. Please see
“ActiveSync and the HX3” in Chapter 3 System Configuration for details on
establishing this connection.
“ActiveSync and the HX3” in Chapter 3 System Configuration for details on
establishing this connection.
Tap
| Run and type warmboot. Tap the OK button. A warm boot does not affect the operating
system, but data and programs in RAM are cleared, and registry changes, if any, are saved.
Network and Bluetooth connections will need to be re-established.
Network and Bluetooth connections will need to be re-established.
There may be slight delays while the wireless client connects to the network, re-authorization for
voice-enabled applications completes, Wavelink Avalanche management of the HX3 startup
completes, or Bluetooth relationships establish or re-establish.
voice-enabled applications completes, Wavelink Avalanche management of the HX3 startup
completes, or Bluetooth relationships establish or re-establish.
Note:
The warmboot terminates the ActiveSync connection. The ActiveSync connection must be
re-established after the HX3 boots.
re-established after the HX3 boots.