LXE hx3 参考指南
Power Key Functions
23
E-EQ-HX3RG-C
HX3 Reference Guide
Cold Boot
This action requires an ActiveSync connection and LXEConnect. Please see
“ActiveSync and the HX3” in Chapter 3 System Configuration for details on
establishing this connection.
“ActiveSync and the HX3” in Chapter 3 System Configuration for details on
establishing this connection.
Tap
| Run and type coldboot. Tap the OK button. Factory default settings overwrite all
previously saved user settings.
• Wireless Client configuration will need to be completed by the System
Administrator.
• Required mappable keys will need to be configured.
• Optional software
• Optional software
and LXE application
parameters will need to be set up by the
System Administrator.
Important -- Because of the extreme nature of the Cold Boot, LXE recommends that the
Cold Boot process be used only as an emergency procedure and Warm Boot or
Suspend/Resume be used whenever necessary.
Cold Boot process be used only as an emergency procedure and Warm Boot or
Suspend/Resume be used whenever necessary.
Note:
Refer to the section titled Power Modes for more information relating to the power states
of the HX3.
of the HX3.
Note:
The HX3 reloads the operating system upon every warm boot or cold boot. Anything not
saved or preserved to the registry is lost.
saved or preserved to the registry is lost.
In warm boot, the OS and the CAB files are reloaded from the internal SD card and the
preserved registry is also reloaded.
preserved registry is also reloaded.
During cold boot, the system behavior is identical to warm boot with the addition that the
registry is erased, forcing the HX3 to reboot with factory defaults. The registry is recreated
when 20 minutes of uptime elapses or upon the first save or suspend function. It is also
recreated every 10 registry changes and at every warm boot.
registry is erased, forcing the HX3 to reboot with factory defaults. The registry is recreated
when 20 minutes of uptime elapses or upon the first save or suspend function. It is also
recreated every 10 registry changes and at every warm boot.
Note:
The coldboot terminates the ActiveSync connection. The ActiveSync connection must be
re-established after the HX3 boots.
re-established after the HX3 boots.
1
Optional software setup may include Summit Wireless Client communication setup, Voice-
Enabled software, Wavelink Avalanche management of the HX3 and Bluetooth device-pairing
and re-connect.
and re-connect.
2
LXE application software setup may include Summit Wireless Client communication setup.