Xerox Phaser 3140 用户指南

Troubleshooting_ 53

By selecting the correct media types, most paper jams can be avoided. 

When a paper jam occurs, refer to the next guidelines. 

•

Ensure that the adjustable guides are positioned correctly. (See 

•

Do not overload the tray. Ensure that the paper level is below the paper 

capacity mark on the inside of the tray.

•

Do not remove paper from the tray while your machine is printing.

•

Flex, fan, and straighten paper before loading. 

•

Do not use creased, damp, or highly curled paper.

•

Do not mix paper types in a tray.

•

Use only recommended print media.

•

Ensure that the recommended side of the print media is facing down in 

the tray, or facing up in the manual tray.

If a paper jam occurs, the 

 LED on the control panel lights orange. Find 

and remove the jammed paper. 
To resume printing after clearing paper jams, you must open and close the 

front cover.

To avoid tearing the paper, pull the jammed paper out slowly and 

gently. Follow the instructions in the following sections to clear the 

jam. 

1. Open and close the front cover. The jammed paper is automatically 

ejected from the machine.
If the paper does not exit, go to the next step.

2. Pull out tray.

3. Remove the jammed paper by gently pulling it straight out.

If the paper does not move when you pull, or if you do not see the paper 

in this area, check the fuser area around the toner cartridge. (See 

4. Insert tray back into the machine until it snaps into place. Printing 

automatically resumes.

1. If the paper is not feeding properly, pull the paper out of the machine.

2. Open and close the front cover to resume printing.