Xerox Phaser 3140 用户指南

Troubleshooting_ 54

The fuser area is hot. Take care when removing paper from the 

machine.

1. Open the front cover and pull the toner cartridge out, lightly pushing it 

down.

2. Remove the jammed paper by gently pulling it straight out.

3. Replace the toner cartridge and close the front cover. Printing 

automatically resumes.

1. Open and close the front cover. The jammed paper is automatically 

ejected from the machine.
If you do not see the jammed paper, go to next step.

2. Gently pull the paper out of the output tray.

If you do not see the jammed paper or if there is any resistance when 

you pull, stop and go to the next step.

3. Open the rear cover.
4. Pull the pressure levers down and remove the paper. 

Return the pressure levers to their original position.

5. Pull the fuser cover levers down and remove the paper. 

Return the fuser cover levers to their original position.

The fuser area is hot. Take care when removing paper from the 

machine.

6. Close the rear cover.
7. Open and close front cover, printing automatically resumes.