Cisco Cisco Customer Voice Portal 8.0(1)
8-29
Cisco Customer Voice Portal (CVP) Release 3.1(0) Configuration and Administration Guide
Chapter 8 VoIP Configuration
Call Survivability
en_4.wav
en_5.wav
en_6.wav
en_7.wav
en_8.wav
en_9.wav
en_star.wav
en_pound.wav
For example:
copy tftp: flash:survivability.tcl
copy tftp: flash:en_error.wav
copy tftp: flash:en_holdmusic.wav
copy tftp: flash:en_pleasewait.wav
copy tftp: flash:en_0.wav
copy tftp: flash:en_1.wav
copy tftp: flash:en_2.wav
copy tftp: flash:en_3.wav
copy tftp: flash:en_4.wav
copy tftp: flash:en_5.wav
copy tftp: flash:en_6.wav
copy tftp: flash:en_7.wav
copy tftp: flash:en_8.wav
copy tftp: flash:en_9.wav
copy tftp: flash:en_star.wav
copy tftp: flash:en_pound.wav
Step 3
On the gateway, define two applications as follows:
Note
See the
section below for more details on
configuration options.
application
service somename flash:bootstrap.vxml
paramspace english index 0
paramspace english language en
paramspace english location flash
paramspace english prefix en
!
service handoff flash:handoff.tcl
paramspace english index 0
paramspace english language en
paramspace english location flash:
paramspace english prefix en
Step 4
On the gateway, do a "call load application voice somename" and "call load application voice handoff".
Step 5
Create at least one CVP pots dial-peer on the gateway, placing the CVP called number on an
incoming-called-number parameter. Assign the somename application to this dial-peer.
incoming-called-number parameter. Assign the somename application to this dial-peer.
Step 6
The recovery functionality in this script functions best when the SetTransferLabel command in
Customer Voice Portal Voice Browser VBAdmin is activated.
Customer Voice Portal Voice Browser VBAdmin is activated.
How to Configure the Gateway for Call Survivability
You can configure the following parameters on the gateway for call survivability: