Cisco Cisco Web Security Appliance S360 安装指南

1-5

Cisco x90 Series Content Security Appliances Installation and Maintenance Guide

Chapter 1 Installing Cisco x90 Series Content Security Appliances

Installing Cisco x90 Series Content Security Appliances In a Rack

Installing Cisco x90 Series Content Security Appliances In a
Rack

This section contains the following sections:

•

Using the Rack Kit to Install Cisco x90 Series Content Security Appliances, page 1-5

•

Installing the Cable Management Arm (Optional), page 1-8

•

Reversing the Cable Management Arm (Optional), page 1-9

Using the Rack Kit to Install Cisco x90 Series Content Security Appliances

This section describes how to install Cisco x90 Series Content Security Appliances in a rack using the
rack kits that are sold by Cisco.

Warning

To prevent bodily injury when mounting or servicing this unit in a rack, you must take special
precautions to ensure that the system remains stable. The following guidelines are provided to ensure
your safety:

This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest component
at the bottom of the rack.
If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit in the rack.

Statement 1006

Step 1

Attach the inner rails to the sides of the appliance:

Align an inner rail with one side of the appliance so that the three keyed slots in the rail align with
the three pegs on the side of the appliance (see

Figure 1-1

and

Figure 1-2

Set the keyed slots over the pegs, and then slide the rail toward the front to lock it in place on the
pegs. The front slot has a metal clip that locks over the front peg.

Install the second inner rail to the opposite side of the appliance.

Figure 1-1

Attaching Inner Rail to Side of One-RU Appliances

Front of appliance

Locking clip on inner rail

353363