Panasonic dmc-lz10 操作指南

If you put the menu back to the settings at the time of purchase, the conditions may be 
improved. Carry out the [RESET] in the setup menu while the camera is in the recording 
mode. 

The remaining battery power may not be displayed 
accurately, and the camera may suddenly stop working, when 
the type of battery and the settings on [BATTERY TYPE] are 
not identical. However this is not a malfunction. Depending 
on the battery brand and the operating temperature, or if 
exhausted batteries are used, the remaining battery power 
may not be displayed accurately.
Please check [BATTERY TYPE] 

 in the [SETUP] menu. 

Are the batteries inserted correctly?
Use sufficiently charged batteries when using Ni-MH 
batteries.

 activated? Press the shutter 

button halfway to deactivate these modes.
Are the batteries exhausted? Replace them with batteries 
which have sufficient capacity. (When you use Ni-MH 
batteries, charge them.)

Are the batteries exhausted? Replace them with batteries 
which have sufficient capacity. (When you use Ni-MH 
batteries, charge them.)
If you leave the camera on, the battery will be exhausted. 
Turn the camera off frequently by using economy mode 

 etc.

•

•

Is the mode correctly set?
Is there any memory capacity left on the built-in memory or 
the card?
Before recording, delete some pictures. 

The picture can become whitish if there is dirt e.g. fingerprints 
on the lens. If the lens is dirty, turn on the camera, eject the 
lens barrel and gently wipe the lens surface with a soft dry 
cloth.

mode set? 

■

■