Panasonic dmc-lz10 操作指南
- 11 -
Others
Conditions
Causes
The subject is not
focused properly.
focused properly.
The focus range varies depending on the recording mode.
Set the proper recording mode for the distance to the subject.
Is the subject out of the focus range?
Set the proper recording mode for the distance to the subject.
Is the subject out of the focus range?
Have you taken a picture with jitter?
The subject is not focused until the shutter button is pressed
halfway. (However, this excludes intelligent auto mode [
The subject is not focused until the shutter button is pressed
halfway. (However, this excludes intelligent auto mode [
].)
The recorded picture
is blurred. The optical
image stabilizer is not
effective.
is blurred. The optical
image stabilizer is not
effective.
When taking a picture in shaded areas or indoors, the shutter
speed becomes slow and the Optical Image Stabilizer function
may not work properly. In this case, we recommend holding the
camera with both hands firmly to take pictures.
speed becomes slow and the Optical Image Stabilizer function
may not work properly. In this case, we recommend holding the
camera with both hands firmly to take pictures.
Images are grainy or
noisy.
noisy.
Is the ISO sensitivity high or the shutter speed slow?
(When set to [AUTO], ISO sensitivity increases for indoor and
other shooting occasions.)
(When set to [AUTO], ISO sensitivity increases for indoor and
other shooting occasions.)
Reduce ISO sensitivity.
Enhance [NOISE REDUCTION] of [PICT.ADJ.] or, lower
the setting for each items other than [NOISE REDUCTION].
the setting for each items other than [NOISE REDUCTION].
Improve the ambient light.
•
•
•
•
In [HIGH SENS.] and [HI-SPEED BURST] in scene mode, the
resolution of the recorded picture decreases slightly because of
high sensitivity processing. This is not a malfunction.
In [HIGH SENS.] and [HI-SPEED BURST] in scene mode, the
resolution of the recorded picture decreases slightly because of
high sensitivity processing. This is not a malfunction.
The brightness or
colour of the picture
differs from the actual
scene.
colour of the picture
differs from the actual
scene.
Brightness and colours may change when using a fast shutter
speed under fluorescent lights, but this is a characteristic of
such lighting and is not a malfunction.
speed under fluorescent lights, but this is a characteristic of
such lighting and is not a malfunction.
Shooting of motion
pictures stops
unexpectedly.
pictures stops
unexpectedly.
This camera is not compatible with motion picture recording
on MultiMediaCards.
on MultiMediaCards.
When you set the [PICTURE MODE] to [30fpsVGA] or
[30fps16:9], we recommend using cards that offer 10
MB/second or higher speeds (shown on their packages and
elsewhere) for best results.
Depending on the type of SD Memory Card or SDHC
Memory Card, recording may stop in the middle.
[30fps16:9], we recommend using cards that offer 10
MB/second or higher speeds (shown on their packages and
elsewhere) for best results.
Depending on the type of SD Memory Card or SDHC
Memory Card, recording may stop in the middle.
•
•
Reddish vertical lines
appear on the LCD
monitor while shooting
appear on the LCD
monitor while shooting
This is a phenomenon called smear. It
is a characteristic of CCD and appears
when the subject has a bright part.
Irregularities may also appear around
the smear, but this is not a malfunction.
(It is recorded in motion pictures but
not on still pictures.)
We recommend not to let a strong
source of light such as the sun light
enter the screen when taking pictures.
is a characteristic of CCD and appears
when the subject has a bright part.
Irregularities may also appear around
the smear, but this is not a malfunction.
(It is recorded in motion pictures but
not on still pictures.)
We recommend not to let a strong
source of light such as the sun light
enter the screen when taking pictures.
•
•