Wulfsberg Electronics Division 2000-UHF1 用户手册
Wulfsberg Electronics
P-2000 and C-2000/RT-2000 Operator’s Manual
Document 150-041102 Revision A
Page 20 of 37
Enhanced System Features
Relay Mode
Relay Mode allows your aircraft’s P-2000-based transceiver system to automatically relay receiver audio from one
transceiver and retransmit it out the transmitter. If a Relay Mode link is established between two locations, a
message received from one location is automatically retransmitted to the other. You can establish relay operation as
follows:
transceiver and retransmit it out the transmitter. If a Relay Mode link is established between two locations, a
message received from one location is automatically retransmitted to the other. You can establish relay operation as
follows:
• From the HOME page select the desired channel for radio 1 and establish communications on that channel.
• From the HOME page select the desired channel for radio 2 and establish communication on the channel.
• Press the MODE button and the Mode Selection page will be displayed:
• Select the RELAY MODE by high-lighting the option and pressing the ENTER button. The unit will now enter
the RELAY mode and the display will look like the one below: